Prospector J.The Dyrt PRO User
Reviewed Feb. 24, 2021

An Arkansas Diamond Mine

The Crater of Diamonds State Park is an exciting place full of rich history and, of course, finding lots of rough diamonds. The State Park is listed as the eighth largest reserve of diamonds in the world according to their website, and this park sets itself apart from anywhere else by allowing visitors to keep any diamonds that they find. Some lucky visitors have even found diamonds worth thousands of dollars.

This review will give you tips about the search area that are based on my firsthand experiences. It will allow you to develop a game plan of possible places to dig, as well as what indicators to look for before taking a trip to the famous Arkansas diamond mine. So, let us begin by identifying what type of indicator rocks that are mixed in with ordinary organic soil on the mine field. Minerals, such as Quartz crystals, calcite, magnetite, spinel, garnet, chromite, and diopside will be the main rocks you will want to look for while prospecting for diamonds. These rocks were created in a similar process during the heating and cooling process of the rock cycle.

Search Area Conditions

The best time to take a trip to the Arkansas diamond fields is after a heavy rainstorm, but keep in mind that you will get muddy during your visit so always wear the appropriate clothes and shoes while out in the search area. The Crater of Diamonds plows their fields, but the implements only turn over the top two feet of dirt repeatedly. Diamonds are found in gravel deposits within the mind field, but they will be below two feet anywhere on the search field.

Secondly, you must be able to probe correctly to understand what the ground is underneath. When probing things like vibrations and sound are your friends. Usually, a ground probe is a 10 ft. steel rod that allows you to hear and feel the vibrations. A 4 ft. rod will do for the daily visitor and a 10 ft. rod will be good enough for the most serious Rockhounds ready to dig deep.

Using your probe comes down to the noise that you hear and feel. The first step is to make sure the ground is soaking wet to make the probe pierce the ground easier. Next, as you push down the probe remember there are objects in the ground and not every time your probe stops its diamond bearing gravel Gravel deposits can be as hard as concrete depending on how old the deposit is. You will run into tree roots and layers of hard rock. Keep watering the hole, push down and twist on the probe handle to continue downward in probing until you have met your depth mark.

Once that you have found a promising site by probing the next step is to dig down to to your chosen depth to see for yourself. Other ways of searching are in the form of walking around and picking up anything that shines or simple strip mining one area and separating the dirt from the gravel before starting with your chosen final diamond recovery process to condense the heavy rocks and gemstones to the middle of your screen or sarucca.

For more detailed step by step instructions on probing or the diamond recovery process check out the eBook "How to Find Diamonds" learn more at www.EliteMinersClub(dot)com

  • Crater of Diamonds State Park in Murfreesboro, AR
  • hand full of rough Arkansas diamonds
  • 60 buckets of gravel dug out of a 12 ft hole at the COD
  • Crater of Diamonds Google Earth view
  • Elite Miner' Club Diamonds Recovery process
  • old miner's shaft at the COD
  • Strawn-Wagner Diamond
  • Star of Arkansas Diamond
  • Okie-Dokie Diamond
  • Sarucca with heavy indicator rocks in the middle along with any diamonds.
  • A diamond on top of cleaned gravel from the COD

Report Content